Plastic Bottles
Spray Bottles
Spray bottles pair PET or PP bottles with fine-mist sprayers, continuous sprayers or trigger sprayers to deliver measured, even application for toners, setting sprays, sunscreens and hair care.
- 30 ml
- 50 ml
- 60 ml
- 80 ml
- 100 ml
- 120 ml
At a glance
- Best for
- Toner and essence mists · Makeup setting sprays · Sunscreen mist formats
- Formula fit
- Hydrating toner mist · Setting spray · SPF mist
- Materials
- PET · PP · HDPE for trigger formats
- Decoration
- Custom colour matching (Pantone or approved physical sample) · Screen printing, up to 6 colours on cylindrical surfaces
What are spray bottles?
Spray performance is a pump property, not a bottle property. Sprayer mechanics set the spray pattern, particle size and dose per stroke, so the sprayer must be chosen before the neck finish is confirmed — most cosmetic mist bottles use 18/415, 20/410 or 24/410 necks.
Fine-mist sprayers suit water-thin formulas below roughly 30 cP. Thicker fluids need continuous or mechanical sprayers, and formulas containing particulates must be tested for nozzle blockage.
Typical specification range
Values below are the ranges we quote most often. Confirm against your formula viscosity, fill weight and destination market before freezing a specification.
| Parameter | Options we quote |
|---|---|
| Capacities | 30 ml, 50 ml, 60 ml, 80 ml, 100 ml, 120 ml, 150 ml, 200 ml, 250 ml |
| Materials | PET, PP, HDPE for trigger formats, PCR PET |
| Closures / dispensing | Fine-mist sprayer 18/415, 20/410, 24/410, Continuous (BOV-style) sprayer, Trigger sprayer 24/410, 28/410, Mini mist with overcap |
| Customisation | Custom colour matching (Pantone or approved physical sample), Screen printing, up to 6 colours on cylindrical surfaces, UV digital printing (short runs, multi-SKU artwork), Hot stamping for logos and metallic accents, Frosted, soft-touch, spray-coated or metallic finishing, Wrap label, front-and-back label or shrink sleeve, PCR or mono-material construction options |
| MOQ | 1,000 pcs per design for stock moulds; 3,000 pcs for decorated orders; 10,000 pcs per size for custom moulds. |
| Sampling time | Stock samples in 5–10 working days; custom colour and decorated samples in 10–20 working days. |
| Production lead time | 15–30 working days after sample approval, depending on quantity, decoration and assembly complexity. |
Product features
Spray pattern control
Sprayers are specified by pattern diameter, particle size and output per stroke, then tested with your formula viscosity at sampling stage.
Leak-safe travel formats
Mini spray bottles are tested for inverted leak and pressure change for air travel and e-commerce shipping.
Matching caps and optics
Overcaps in matching or metallised finishes keep the pack retail-ready while protecting the actuator in transit.
Who it is suitable for
- Toner and essence mists
- Makeup setting sprays
- Sunscreen mist formats
- Hair care mist and dry shampoo
- Sanitiser and refresh sprays
Suitable formulas and products
- Hydrating toner mist
- Setting spray
- SPF mist
- Scalp and hair mist
- Body mist
- Room and linen style mists (non-cosmetic use)
Customisation options
Spray Bottles can be delivered as a stock-mould pack with your colour and decoration, or developed into a proprietary format. Decoration is specified against the final surface finish so print adhesion and colour hold in use.
- Custom colour matching (Pantone or approved physical sample)
- Screen printing, up to 6 colours on cylindrical surfaces
- UV digital printing (short runs, multi-SKU artwork)
- Hot stamping for logos and metallic accents
- Frosted, soft-touch, spray-coated or metallic finishing
- Wrap label, front-and-back label or shrink sleeve
- PCR or mono-material construction options
How these are manufactured
Parts are moulded by injection, injection blow or extrusion blow moulding depending on the format and material, then assembled, decorated and inspected in lots. Moulding parameters are recorded per mould so repeat orders match the approved sample. Read the manufacturing process.
Quality control
Dimension and weight checks, closure torque, leak and dose testing where relevant, colour verification (ΔE ≤ 1.5 opaque parts) and AQL 1.0/2.5 final inspection. Lot records are supplied with the shipping documents. See the inspection checklist.
Materials for this range
- PET — material guide
- PP — material guide
- PCR plastic — material guide
Frequently asked questions
Answers to the questions buyers ask most about spray bottles. Send any specific question through the contact form and a packaging engineer will reply in writing.
What viscosity can a fine-mist sprayer handle?
Most fine-mist sprayers handle water-thin fluids under about 30 cP. Thicker or oil-based formulas need a different sprayer type, and formulas with suspended particles above roughly 100 µm risk nozzle blockage — test your formula before production.
Can I use a spray bottle for sunscreen?
Yes for fluid alcohol-based SPF formats. Aerosol-free spray sunscreen needs thorough testing for dose uniformity and spray pattern, since SPF depends on consistent coverage.
Are spray bottles leak-tested?
Yes. Spray assemblies are tested for leak resistance, priming strokes, dose per stroke and spray pattern at inspection, with results recorded per production lot.
What MOQ applies to spray bottles?
1,000 pcs per design for stock moulds; 3,000 pcs for decorated orders; 10,000 pcs per size for custom moulds.
What is the MOQ for spray bottles?
1,000 pcs per design for stock moulds; 3,000 pcs for decorated orders; 10,000 pcs per size for custom moulds.
Can I customise the colour?
Yes. Colour is matched to a Pantone reference or a physical sample and verified on production-resin parts. Custom colour matching (Pantone or approved physical sample) is the standard route, and we supply samples for approval before the run.
Can you print or emboss my logo?
Yes — printing, hot stamping, coating, labelling and custom closures are all available for spray bottles. Choose the method with your surface finish in mind: gloss print or foil works best on matte and soft-touch surfaces.
Can I request samples?
Stock samples in 5–10 working days; custom colour and decorated samples in 10–20 working days. Stock samples are supplied free (up to five pieces per SKU, courier at your cost); custom colour and decorated samples are quoted per project, typically USD 120–450.
Can you develop a custom mould?
Yes. Custom tooling is quoted as a separate line item with the cavity plan stated, usually from around 10,000 pcs per size and 25–40 calendar days from drawing approval to first-article inspection.
What is the production lead time?
15–30 working days after sample approval, depending on quantity, decoration and assembly complexity.
Do you ship internationally?
Yes. We ship spray bottles to the United States, Canada, the UK, Europe, Australia, the Middle East, Southeast Asia, Japan, South Korea and Latin America, quoting FOB, CIF, DDP and air freight.
Which materials are available?
PET, PP, HDPE for trigger formats, PCR PET. Selection is driven by formula compatibility, clarity requirements, decoration and any recycled-content target.
Still have a question? Talk to a packaging expert.
More in Plastic Bottles
PET Bottles
PET cosmetic bottles are clear, lightweight, strong and cost-effective, which makes them the most common choice for lotions, toners, cleansers and body care in retail volumes of 30 ml to 500 ml.
30 ml · 50 ml · 60 ml · 100 ml · more
View range →
HDPE Bottles
HDPE cosmetic bottles are opaque, durable, chemical-resistant and the most cost-effective option above 250 ml, which is why they dominate cleansers, shampoo, body wash and professional-size skincare.
50 ml · 100 ml · 150 ml · 200 ml · more
View range →
PP Bottles
PP cosmetic bottles combine heat and chemical resistance with mono-material recyclability, making them the default choice for travel sizes, treatment formats, professional products and refillable systems.
15 ml · 20 ml · 30 ml · 50 ml · more
View range →
Cosmetic Bottles
Plastic cosmetic bottles are the largest packaging family in skincare: 15 ml to 1,000 ml formats in PET, PP or HDPE, closed with a disc, pump, sprayer, dropper or cap and decorated with your brand colour and logo.
15 ml · 20 ml · 30 ml · 50 ml · more
View range →
Lotion Bottles
Lotion bottles are medium-to-large plastic bottles, normally 50–500 ml, closed with a disc-top cap, flip-top or lotion pump to dispense viscous emulsions reliably.
50 ml · 60 ml · 80 ml · 100 ml · more
View range →
Serum Bottles
Serum bottles are small, high-precision packs — usually 15 ml to 50 ml — closed with a dropper, treatment pump or airless pump, and finished to premium retail standards because the packaging often justifies a high price per millilitre.
15 ml · 20 ml · 30 ml · 40 ml · more
View range →Continue researching
Quotes and samples for spray bottles
Send the capacity, quantity, colour reference and decoration you need. We reply with MOQ, unit price band, sampling time and lead time — and we will tell you if a different format suits your formula better. Stock mould formats from 1,000 pcs per design; decorated orders typically from 3,000 pcs; custom moulds usually from 10,000 pcs per size.
No account required · NDA available · Quote replies within one business day (Mon–Sat, GMT+8)