Skincare Packaging
Toner Packaging
Toner packaging is a 100–500 ml PET or PP bottle with a disc-top cap, pump or fine-mist sprayer, and the material choice is driven by alcohol and acid content as much as by appearance.
- 50 ml
- 100 ml
- 120 ml
- 150 ml
- 200 ml
- 250 ml
At a glance
- Best for
- Hydrating and exfoliating toners · K-beauty essence formats · Facial mist and setting products
- Formula fit
- Hydrating toner · AHA / BHA toner · Alcohol-based astringent
- Materials
- PET / rPET · PP · HDPE
- Decoration
- Custom colour matched to the brand palette · Printing on body, lid and shoulder
What are toner packaging?
Toners range from water-thin hydrating essences to exfoliating acid solutions and alcohol-based astringents. Those formulas sit at opposite ends of the compatibility spectrum: PET suits most hydrating toners, while high-alcohol and low-pH formulas are safer in PP.
Dispensing style is the second decision: a mist sprayer suits hydrating essences, a disc-top cap suits pour-and-cotton use, and a pump suits watery essences applied by hand.
Typical specification range
Values below are the ranges we quote most often. Confirm against your formula viscosity, fill weight and destination market before freezing a specification.
| Parameter | Options we quote |
|---|---|
| Capacities | 50 ml, 100 ml, 120 ml, 150 ml, 200 ml, 250 ml, 300 ml, 400 ml, 500 ml |
| Materials | PET / rPET, PP, HDPE, PETG |
| Closures / dispensing | Disc-top cap, Flip-top cap, Fine-mist sprayer, Lotion pump, Screw cap, Push-pull cap |
| Customisation | Custom colour matched to the brand palette, Printing on body, lid and shoulder, Hot stamping for premium retail packs, Frosted, soft-touch or metallic finishing, Secondary packing: cartons, inserts, shrink sleeve, Closure and component upgrades (airless, dropper, pump) |
| MOQ | 1,000 pcs per design for stock moulds; 3,000 pcs for decorated orders; 10,000 pcs per size for custom moulds. |
| Sampling time | Stock samples in 5–10 working days; custom colour and decorated samples in 10–20 working days. |
| Production lead time | 15–30 working days after sample approval, depending on quantity, decoration and assembly complexity. |
Product features
Compatibility-led material choice
We review your toner's alcohol and acid level and recommend PET, rPET or PP so the pack does not craze or stress-crack.
Mist or pour
Fine-mist sprayers for essences, disc caps for pour use and pumps for measured dispensing are all available for the same mould family.
Volume flexibility
Toner is used generously, so 200 ml and 300 ml formats with efficient cartons reduce cost per use and shipped volume.
Who it is suitable for
- Hydrating and exfoliating toners
- K-beauty essence formats
- Facial mist and setting products
- Professional-size toner
- Refill toner formats
Suitable formulas and products
- Hydrating toner
- AHA / BHA toner
- Alcohol-based astringent
- Essence
- Facial mist
- Post-cleanse pH toner
Customisation options
Toner Packaging can be delivered as a stock-mould pack with your colour and decoration, or developed into a proprietary format. Decoration is specified against the final surface finish so print adhesion and colour hold in use.
- Custom colour matched to the brand palette
- Printing on body, lid and shoulder
- Hot stamping for premium retail packs
- Frosted, soft-touch or metallic finishing
- Secondary packing: cartons, inserts, shrink sleeve
- Closure and component upgrades (airless, dropper, pump)
How these are manufactured
Parts are moulded by injection, injection blow or extrusion blow moulding depending on the format and material, then assembled, decorated and inspected in lots. Moulding parameters are recorded per mould so repeat orders match the approved sample. Read the manufacturing process.
Quality control
Dimension and weight checks, closure torque, leak and dose testing where relevant, colour verification (ΔE ≤ 1.5 opaque parts) and AQL 1.0/2.5 final inspection. Lot records are supplied with the shipping documents. See the inspection checklist.
Materials for this range
- PET — material guide
- PP — material guide
- HDPE — material guide
Frequently asked questions
Answers to the questions buyers ask most about toner packaging. Send any specific question through the contact form and a packaging engineer will reply in writing.
Is PET suitable for acid toners?
For mild AHA/BHA toners yes, with a compatibility check. For strongly acidic or high-alcohol formulas we recommend PP, which has better chemical resistance and avoids stress cracking over the product's shelf life.
Which sprayer suits a hydrating toner?
A fine-mist sprayer sized for the toner's viscosity — normally 18/415 or 20/410 for 50–200 ml bottles. For thicker essences use a miscer or pump instead, because mist quality drops quickly above about 30 cP.
Can I use one bottle for both a mist and a pour toner?
Yes if the neck finish is standard (for example 24/410), because both a disc cap and a mist sprayer can be supplied for the same bottle.
What MOQ applies to toner packaging?
1,000 pcs per design for stock moulds; 3,000 pcs for decorated orders; 10,000 pcs per size for custom moulds.
What is the MOQ for toner packaging?
1,000 pcs per design for stock moulds; 3,000 pcs for decorated orders; 10,000 pcs per size for custom moulds.
Can I customise the colour?
Yes. Colour is matched to a Pantone reference or a physical sample and verified on production-resin parts. Custom colour matched to the brand palette is the standard route, and we supply samples for approval before the run.
Can you print or emboss my logo?
Yes — printing, hot stamping, coating, labelling and custom closures are all available for toner packaging. Choose the method with your surface finish in mind: gloss print or foil works best on matte and soft-touch surfaces.
Can I request samples?
Stock samples in 5–10 working days; custom colour and decorated samples in 10–20 working days. Stock samples are supplied free (up to five pieces per SKU, courier at your cost); custom colour and decorated samples are quoted per project, typically USD 120–450.
Can you develop a custom mould?
Yes. Custom tooling is quoted as a separate line item with the cavity plan stated, usually from around 10,000 pcs per size and 25–40 calendar days from drawing approval to first-article inspection.
What is the production lead time?
15–30 working days after sample approval, depending on quantity, decoration and assembly complexity.
Do you ship internationally?
Yes. We ship toner packaging to the United States, Canada, the UK, Europe, Australia, the Middle East, Southeast Asia, Japan, South Korea and Latin America, quoting FOB, CIF, DDP and air freight.
Which materials are available?
PET / rPET, PP, HDPE, PETG. Selection is driven by formula compatibility, clarity requirements, decoration and any recycled-content target.
Still have a question? Talk to a packaging expert.
More in Skincare Packaging
Serum Packaging
Serum packaging is usually a 15–50 ml dropper bottle, airless bottle or treatment pump bottle, and the right choice depends on how sensitive the active is to air and light rather than on aesthetics alone.
15 ml · 20 ml · 30 ml · 40 ml · more
View range →
Moisturizer Packaging
Moisturizer packaging is decided by texture and preservation: thixotropic creams go into 30–60 ml jars, pumpable emulsions into 50–100 ml pump or airless bottles, and sensitive actives into airless jars.
15 ml · 30 ml · 50 ml · 60 ml · more
View range →
Face Cream Packaging
Face cream packaging is normally a 30–60 ml jar in PP, acrylic or airless construction, and the decision between them sets the perceived price point and the level of protection the formula receives.
15 ml · 30 ml · 50 ml · 60 ml · more
View range →
Cleanser Packaging
Cleanser packaging is usually a 100–500 ml HDPE or PET bottle with a flip-top cap, pump or foam pump, chosen for wet-hand handling and for cost efficiency because cleansers move in high volumes.
100 ml · 120 ml · 150 ml · 200 ml · more
View range →
Sunscreen Packaging
Sunscreen packaging is usually a 50–200 ml tube, airless bottle or spray bottle, and the choice depends on where the product is applied, whether the SPF formula contains solvents or oils, and how dose-per-use accuracy affects SPF claims.
30 ml · 50 ml · 60 ml · 80 ml · more
View range →
Eye Cream Packaging
Eye cream packaging is a 5–20 ml format — airless pump bottle, small jar or applicator tube — chosen for precise dosing and hygienic application because the product is expensive per millilitre and applied near the eye.
5 ml · 8 ml · 10 ml · 15 ml · more
View range →Continue researching
Quotes and samples for toner packaging
Send the capacity, quantity, colour reference and decoration you need. We reply with MOQ, unit price band, sampling time and lead time — and we will tell you if a different format suits your formula better. Stock mould formats from 1,000 pcs per design; decorated orders typically from 3,000 pcs; custom moulds usually from 10,000 pcs per size.
No account required · NDA available · Quote replies within one business day (Mon–Sat, GMT+8)